photoscan3d Banner

PhotoScan3D in 3D Stereo

The guide is designed to be brief and yet covering all needed steps on how to enable the 3D Stereo Plugin for PhotoScan3D. This is a one-time setup and not needed to be repeated once setup properly.

I. Prepare the 3D Stereo Plugin

1) Please install moreStereo3D.

2) Start moreStereo3D.

II. Configure the 3D Stereo Plugin for PhotoScan3D

3) Right click the moreStereo3D Tray Icon (next to your system time) and select "more3D Stereo Enabler"

4) Click the "Locate known Apps" Button. The more3D stereo enabler will search the folders "C:\Program Files" and "C:\Program Files (x86)" for your PhotoScan3D installation and you can apply the 3D Stereo Plugin for PhotoScan3D.

In case you have installed PhotoScan3D into a non-standard installation directory, please continue with step 5). If the more3D Stereo Enabler found your PhotoScan3D installation properly, please continue on step 8)

5) Click the "Add Application" Button.

6) Navigate to your PhotoScan3D directory. E.g. "E:\"Program Files\Agisoft\PhotoScan"

7) Select the file "photoscan.exe" and press "Open".

8a) Please set "Application Version" to "Win32" for a 32-Bit version of PhotoScan3D. Set "Graphic Library" to "OpenGL" and check the "Enabled"-Checkbox. Press "Save and Close".

8b) Please set "Application Version" to "Win64"for a 64-Bit version of the PhotoScan3D. Set "Graphic Library" to "OpenGL" and check the "Enabled"-Checkbox. Press "Save and Close".

9) Finally its time to start PhotoScan3D. Please have a little patience on the startup, the driver loads right after the start of PhotoScan3D and might take a minute. Open any 3D Mesh and enjoy Stereo 3D.

Please note that we recommend setting the 3D effect manually for this application. Here is a recommended configuration:

Are you not sure how to create a good 3D effect? Find out how in this tutorial video (6 minutes):

If you have any questions or require technical assistance, please do not hestiate to contact support@more3d.com

moreStereo3D provides 3D Stereo for glasses-free 3D displays, 3D Monitors, 3D TVs, 3D Projectors and even Head Mounted Displays from within your application.